What a Mass Save home energy assessment is
The program describes the assessment in a few sentences. An Energy Specialist looks for energy saving opportunities in your home, recommends upgrades, and helps you work through the rebates, incentives and 0% financing that are available. When the visit is done you receive what Mass Save calls a Decarbonization Report, which highlights the incentives you qualify for.
It is offered two ways, virtual or in person, and the Sponsors of Mass Save cover the cost. The Sponsors are the gas and electric providers behind the program. On the eligibility tabs we read, they are Berkshire Gas, Cape Light Compact, Eversource, Liberty, National Grid and Unitil.
Calling it an audit is common, and you will see “energy audit” in plenty of searches. The program’s own term is Home Energy Assessment, and that is the phrase to use when you call.
What the report can include
The assessment page lists what the custom energy report may contain:
- 75 to 100 percent off approved insulation improvements
- No-cost targeted air sealing
- Rebates on qualifying high efficiency heating, cooling or water heating equipment, with eligibility based on what the assessment finds
- Information about 0% financing through the Mass Save HEAT Loan for eligible upgrades
The same page leads with weatherization. It calls insulation and air sealing one of the first steps toward better efficiency and lists benefits that include heating and cooling costs lowered by up to 15 percent, fewer drafts, less outside noise, fewer allergens coming in and a lower chance of ice dams.
Notice the word “may.” The report is specific to your house. A Cape with an open attic and no wall insulation will get a different list than a renovated condo. The assessment is how the program decides what it will support, which is why so many offers depend on it.
Who can get one
The eligibility tab on the assessment page, as of November 2026, says:
- Customers must live in a 1 to 4 unit home
- If you live in a building with 5 or more units, talk to your landlord about a multi-family assessment
- Eligibility for certain rebates is based on the assessment findings
- Some restrictions apply, and offers can change or be cancelled
- Financing needs approval from a participating lender
- Customers who meet household income guidelines may qualify for increased incentives instead
Renters are included. The page says assessments are also available for renters, for landlords of 1 to 4 unit buildings, and for landlords of 5 plus unit buildings.
One group is outside the program. If your electricity comes from a municipal utility, the booking tool tells you that your municipal utility is not part of Mass Save and that you should contact it directly about efficiency programs.
Three ways to book
The “How to Participate” tab starts with a lookup. You enter your zip code and primary heating fuel, and the site points you to the right path. At any time you can call 866-527-SAVE to reach the lead vendor for your area. The paths it describes:
- Lead vendor. Schedule the no-cost assessment with the trusted lead vendor for your area, by phone or online
- Home Performance Contractor. Choose a participating contractor to do the assessment. The page says the same contractor can complete recommended insulation and air sealing in a follow-up visit
- Direct Weatherization. If you already know you want insulation or air sealing and want quick incentives, you can skip the assessment and work with a Direct Weatherization Independent Installation Contractor to scope the project
For heat pump installations, the page points you to a contractor in its Heat Pump Installer Network for a quote. The heating and cooling page also offers a no-cost virtual consultation with a Mass Save Decarbonization Specialist if you are not sure where to start.
The lookup can also flag extra offers for residents of designated equity communities, including 100 percent off weatherization upgrades. Whether that applies depends on where you live, so run the lookup with your own address details.
After the work: inspections
The assessment page says that once work is completed, a quality assurance inspection is performed. It names the lead vendors that do those inspections, depending on your Sponsor: Abode Energy Management, CLEAResult, RISE Engineering, CMC Energy Services and Center for EcoTechnology.
The windows page adds its own inspection rule. The Sponsor may inspect installations before paying a window rebate, projects are chosen at random, and refusing a post-installation inspection could mean losing the rebate.
Offers that depend on the assessment
Several incentives are tied to an assessment on record. These are the ones that come up on renovation projects.
Windows. The program pays $75 per window to replace single-pane windows with ENERGY STAR Most Efficient certified models, but only after your existing windows are verified during an assessment. The Energy Specialist also confirms how many windows qualify. If the assessment calls for air sealing and insulation, you have to complete that work to get the window incentive. Verification has to happen within two years of applying for the rebate.
HEAT Loan. The financing page says an assessment is mandatory if you plan to finance a whole home heat pump, a partial home heat pump when pursuing bonus incentives, windows, weatherization or weatherization barriers. For other measures it is not required but is recommended.
Our Mass Save rebates guide covers each offer and its conditions in more detail.
Timing it around a renovation
This is where homeowners lose the most. A window order gets placed before anyone verifies the old sash. A ceiling gets closed before insulation decisions are made. A loan application goes in after the contractor has already started, when the financing page says applications must come before any work begins.
A better order for a renovation looks like this:
- Book the assessment when the project is still an idea, before design is final
- Read the report and mark what it supports: attic floor, kneewalls, walls, basement rim, windows
- Decide who does that work. It can go to a participating program contractor, or you may choose to do it outside the program and forgo the incentive
- Design the renovation so walls and ceilings opened for other reasons line up with the insulation plan
- File any HEAT Loan application before work starts
- Keep the report, verification records and invoices together
We build the other parts of the project: the framing, drywall, trim, windows and finishes. On a whole home renovation or a home addition, the assessment report is useful even when the program does not pay for the work, because it shows where the house loses heat today.
Getting ready for the visit
Nothing below is a program rule. It is practical advice for getting more out of the visit.
- Clear a path to the attic hatch, the basement and the area around your heating system
- List the rooms that feel cold, drafty or hot in summer, and any ice dams or ceiling stains from past winters
- Note what you plan to change in the next few years, such as a kitchen remodel, an addition or new siding
- Have your utility account information handy, since the program is organized by Sponsor
- Write down questions about windows, since the verification rules are strict
If your house was built before 1978, insulation, window and air sealing work can disturb old paint. You can look up a property’s lead inspection history through the state’s Lead Safe Homes databases. Our Massachusetts lead paint law guide covers what that means for contractors and owners.
Virtual or in person?
The program offers both and does not say one is better. A virtual visit can be simpler to schedule. An in-person visit puts someone in your attic and basement. If you are planning construction, an in-person visit is easier to connect to real conditions like kneewall access, a blocked attic or an unfinished rim joist. Ask the lead vendor which format makes sense for your house when you book.
What the assessment is not
It helps to be clear about the limits, because a Mass Save audit gets confused with other inspections. Nothing on the program pages describes the assessment as a building code inspection, a structural review, a home inspection for a sale or a lead inspection. Those are separate jobs with separate people:
- Building permits and inspections come from your local building department. New work on additions and new homes also has to meet the energy code your town has adopted, which our Massachusetts stretch energy code guide explains
- Lead testing for the state Lead Law is done by a licensed lead inspector, not an Energy Specialist
- Roof leaks, rot and failed flashing need a contractor’s eyes. If your report recommends attic insulation and you also have a stained ceiling, deal with the leak first. Our roofing page covers that work
The assessment also does not lock you into anything. The report lists what you qualify for. You decide what to do, when, and with whom, as long as you follow the program’s rules for any incentive you want to claim.
What we do with the report
When a homeowner sends us a Mass Save assessment report, we read it alongside the renovation plan. We look at which walls and ceilings we will open anyway, where insulation recommendations overlap with our scope, and what the program wants done before windows are replaced. Then we sequence the job so the program work and our work do not undo each other.
We do not perform assessments, and we cannot promise any incentive. For anything related to eligibility or amounts, the program decides. For the building work around it, see our drywall and insulation and windows and doors pages, or contact us with your report and project notes.
This guide is general information for homeowners, not legal advice. Rules change and vary by city or town. Confirm details with your local building department or the state agency listed in the sources.
Common questions
Is a Mass Save energy audit really free?
The program pages say the Sponsors of Mass Save offer no-cost Home Energy Assessments, either virtual or in person. Any work recommended afterward is priced separately, though many measures carry large incentives.
Can renters get a Mass Save assessment?
Yes. The assessment page says assessments are also available for renters, for landlords of 1 to 4 unit buildings and for landlords of buildings with 5 or more units. If you rent in a 5 plus unit building, the page suggests asking your landlord about a multi-family assessment.
Do I have to get an assessment before replacing windows?
If you want the window rebate, yes. The windows page says your existing single-pane windows must be verified during a Home Energy Assessment, and the Energy Specialist confirms how many you can replace.
Can the same company do the assessment and the insulation?
The program allows it. A participating Home Performance Contractor can do the assessment and then complete recommended insulation and air sealing during a follow-up visit.
Is there a way to skip the assessment?
For insulation and air sealing only, the program lists a Direct Weatherization path, where an independent installation contractor scopes the job and you reach incentives without an assessment. Windows and several HEAT Loan measures still need one.
Can Boston Contractors Group do my Mass Save assessment?
No. We are not a Mass Save Sponsor, lead vendor or program contractor. Book the assessment through masssave.com or 866-527-SAVE. We can plan renovation work around the report once you have it.
Sources
Facts on this page were last checked against these sources on November 16, 2026.
- Mass Save, Home Energy Assessments (accessed 2026-11-16)
- Mass Save, Insulation and Air Sealing (accessed 2026-11-16)
- Mass Save, Windows (accessed 2026-11-16)
- Mass Save, 0% Interest Financing (HEAT Loan) (accessed 2026-11-16)
- Mass Save, Heating and Cooling (accessed 2026-11-16)
- Mass.gov, Find Your Home's Lead History (Childhood Lead Poisoning Prevention Program) (accessed 2026-11-16)