Jobs our carpenters handle
Most calls we get start with one item and end with a list. Someone wants a door fixed, and while we are there, they point at the baseboard the dog chewed, the shelf that sags, and the stair tread that creaks under the runner. That is the right way to use a carpenter. One visit with one setup beats four separate service calls.
The work that fits this service well:
- Interior trim: baseboard, casing, crown, chair rail, wainscoting, and patching in missing pieces of original molding
- Built-ins: bookcases, window seats, closet systems, mudroom benches and cabinets around a radiator or chimney breast
- Doors: planing and rehanging sticking doors, new hinges and strike plates, replacing interior doors, and fitting new hardware to old doors
- Stairs and railings: tightening loose balusters, fixing squeaks, replacing worn treads, and rebuilding railings to sit solid
- Exterior rot repair: window sills, door thresholds, porch skirts, columns, corner boards and fascia
- Small framing fixes: blocking for a TV mount or grab bar, reframing a closet, or opening a doorway with the right permit
- Punch lists: the half-finished items left over from a renovation, a move or a house sale
We are not the right call for plumbing, wiring or gas work, which Massachusetts reserves for licensed trades, or for anything that is really a renovation. If your list turns out to be a kitchen, see our kitchen remodeling page instead.
Why a handyman Boston homeowners keep calling needs old-house skills
Boston’s housing stock is old. Triple-deckers in Dorchester and Southie, Victorians in Jamaica Plain and Roslindale, and brick rowhouses in the South End were built with full-dimension lumber, plaster walls and site-made trim. Very little in them is square or standard.
That changes how small jobs go. A new door from a home center will not fit an opening that has racked over a century, so we either trim it carefully or repair the original. Replacement baseboard in a stock profile will not match a hand-built 1890s molding, so we combine stock pieces, have a profile milled, or salvage matching trim from a closet where nobody will notice. Plaster cracks when you nail near it carelessly, so we predrill and use trim screws or a pin nailer. A floor that slopes an inch across the room needs scribed baseboard, not caulk.
There is also lead. Many of the doors, windows and trim in older Boston homes carry layers of lead paint underneath newer coats. Massachusetts requires that renovation, repair or painting in a home built before 1978 be done by a licensed lead-safe renovation contractor. For us that means plastic containment, no dry sanding or heat guns on old paint, HEPA vacuums, and careful cleanup before we leave each day.
Trim, molding and built-ins
Good finish carpentry looks simple and takes time. Mitered corners that stay closed through a heating season, casings that line up with the head jamb next door, and a built-in that fits a wall that leans out of plumb all come down to measuring twice and scribing to the house.
For built-ins we usually build in the shop or on site with cabinet-grade plywood and solid wood faces, then scribe them to the floor and walls. In older rooms we match the existing trim so the new piece looks like it came with the house. Painted built-ins hand off cleanly to our painting crew, and anything that needs new wall finishes around it goes to our drywall and insulation team.
Rot repair on porches, sills and windows
Exterior wood rot is the most common repair we see in Boston, and it nearly always starts the same way. Water sits on a flat surface or gets trapped behind paint or caulk, and a few winters later the wood is soft. The usual suspects are window sills, the bottom of door jambs, porch column bases, skirt boards near the ground, and the joint where a porch floor meets the house.
Our approach:
- Probe the area to find where the rot stops. Paint hides a lot, and the visible soft spot is often smaller than the actual damage.
- Cut out everything soft and replace it with rot-resistant wood, spliced and glued so the joint sheds water instead of trapping it.
- On detailed or historic trim where replacement would lose the profile, use epoxy consolidant and filler on small areas.
- Fix the cause: add a drip edge, correct the slope of a sill, or replace failed flashing over a door head.
- Prime all sides of new wood before it goes in, so it does not wick water from behind.
When rot reaches a structural post, sill plate, rim joist or beam, the job becomes structural carpentry. Massachusetts guidance treats structural carpentry as needing a construction supervisor license, Home Improvement Contractor registration on owner-occupied homes, and a building permit. Larger porch and deck rebuilds belong with our decks and patios crew.
Doors and stairs in old houses
Most door problems in Boston are not the door. A house settles, a jamb goes out of square, and the door starts binding at the top corner or refusing to latch. We check the hinges first, because a loose screw in a stripped hinge leaf causes more sticking doors than anything else. After that we shim or reset hinges, plane the door where it rubs, move the strike, and only replace the door if it is cracked, warped or rotted.
Replacing an interior door slab in an existing frame is a small job. Installing a new door, including a new frame, or replacing an exterior exit door, is treated differently. State guidance lists door installation as needing a construction supervisor license and a permit, and door replacement as needing a permit when it involves an exit door or public safety. The Specialty window and door license allows repair of damaged window or door framing under 4 feet wide, which covers many old openings. Exterior door and window replacement is covered in detail on our windows and doors page.
Stairs follow the same logic. Fixing a squeak, regluing a tread or tightening balusters is ordinary repair. Rebuilding exterior stairs is listed by the state as needing a license, registration and a permit, and in a multi-family building those back stairs are often the second way out, so they get built to code with the right railing heights and riser dimensions.
When a small job needs a permit, HIC or CSL
People are often surprised by how much small work Massachusetts lets go without a permit, and by which small jobs do need one. The state’s Office of Consumer Affairs publishes a general guidance chart, and it is worth reading before you hire anyone. A few lines from it that matter for carpentry:
| Job | License (CSL) | HIC registration | Building permit |
|---|---|---|---|
| Trim carpentry | Maybe (if fire rating required) | Yes | No |
| Kitchen cabinets and shelving | Maybe | Yes | No, unless part of a larger project |
| Structural carpentry | Yes | Yes | Yes |
| Door installation | Yes | Yes | Yes |
| Exterior stairs | Yes | Yes | Yes |
| Interior painting | No | No | No |
The chart is guidance, and the local building official has the final word. In Boston, minor repairs and replacements that do not change structure or use are filed as Short Form permits with Inspectional Services. Work must start within six months, and the licensed contractor has to be on site for the final inspection. Anything that changes structure, like removing a wall or framing a new opening in a bearing wall, moves to a Long Form permit, which requires plans stamped by a Massachusetts registered architect or engineer.
On a cabinet job, the City of Boston says adding or replacing kitchen cabinets does not need a permit, but a project that affects gas or electrical lines or turns into a full kitchen renovation does.
Handyman services Boston condo owners and landlords use
A lot of our small-job work is in two and three unit buildings, where the rules shift a little. If you own and live in one unit of a triple-decker, your home still counts as an owner-occupied building of one to four units, so the Home Improvement Contractor rules above apply to work on it. If you own the building as a rental and do not live there, that protection does not apply in the same way, and it is worth being even more careful about the written scope and payment terms.
Condo owners have an extra step. Your unit’s interior trim and doors are usually yours to change, but common areas such as the front hall, back stairs, porches and exterior trim usually belong to the association. Before we touch anything outside your unit, check your master deed or ask the trustees, and get the approval in writing. We are happy to send the board a scope and photos.
For landlords, the jobs tend to bunch up between tenants: doors that no longer latch, closet shelving pulled out of the plaster, cracked thresholds, and rotted sills on the porch. We can walk a unit with you, price the list item by item, and do the work in a few days so the unit is ready to show. Anything that turns into a code question, like a back stair railing that is loose at every post, gets flagged in writing so you can decide how to handle it.
How to vet a Boston handyman
Carpenters in Boston range from excellent tradespeople to people with a truck and a drill. Before you hand anyone a key, check these:
- Home Improvement Contractor registration. If you live in your home and it has one to four units, any contractor working on it must be registered. The number has to appear on their contract, permits and advertising. Contracting with an unregistered contractor means losing access to the state’s Guaranty Fund.
- Construction Supervisor License for anything structural or permitted. Ask whose license will be on the permit.
- A lead-safe renovation contractor license if your home was built before 1978.
- A written contract for anything over $1,000, with a payment schedule. The deposit cannot exceed one third of the price or the cost of special-order materials, whichever is greater.
- Proof of insurance sent directly from the insurer.
- A clear answer on what happens when they open a wall and find something unexpected. Old houses always have something.
What affects the price of carpentry and repairs
We price small jobs by the scope, not by guessing a day rate in advance. The factors that move a carpentry estimate in Boston:
- How many items we can group into one visit, and whether they are in the same room or spread across three floors
- Lead-safe setup and cleanup in pre-1978 homes, which adds time to any job that disturbs old paint
- Matching existing trim profiles, especially if a custom knife has to be ground to mill a molding
- How far rot has spread once the paint and caulk come off
- Material choice: paint-grade poplar or pine, rot-resistant exterior stock, or hardwoods for stained trim and treads
- Parking and access. A third floor walk-up in the North End with no parking takes longer than a ranch in Hyde Park
- Permits and licensed supervision when the job turns structural
Where we work
We send carpenters to every Boston neighborhood, from Charlestown and East Boston to Hyde Park and West Roxbury, and to nearby towns. For the rest of our Massachusetts coverage, see our statewide service area, or send us your list and we will tell you which items we can take on in a single visit.
How a carpentry & repairs project works with us
Call or request an estimate
Tell us what you need and roughly when.
On-site visit
We look at the space, measure and talk through options.
Written estimate
A clear scope, price and schedule, line by line.
Permits & build
We file permits, do the work, pass inspections and walk it through with you.
Carpentry & Repairs across Massachusetts
- Handyman Ashland MA: Small Repairs, Done to the Rules
- Handyman Cambridge MA: Small Carpentry Jobs in Old, Stacked Buildings
- Handyman Framingham MA: Small Jobs, City Rules and When to Call a Carpenter
- Handyman Hanover MA: Small Jobs and the Rules That Still Apply
- Handyman Haverhill MA: Small Repairs, Rental Turnovers and City Permits
- Handyman Lowell MA: Repairs for Shared Porches, Stairs and Doors
- Carpenter Melrose MA: Porches, Decks, Stairs and Trim on Older Houses
- Handyman Plymouth MA: Carpentry and Repair Lists for Every Age of House
- Handyman Springfield MA: Small Repairs and Carpentry Done Right
- Handyman Worcester MA: Porches, Stairs and Old Trim in Shared Buildings
Carpentry & Repairs questions
Do you take small handyman jobs in Boston?
Yes, when they are carpentry or repair work that needs a skilled hand. We get the most value for you by grouping several items, like a sticking door, loose stair balusters, a rotted sill and new closet shelving, into one visit with one setup.
Does a handyman need a license in Massachusetts?
It depends on the work. Anyone contracting on an owner-occupied home with one to four units must be registered as a Home Improvement Contractor. Structural carpentry, door installation, exterior stairs and most work that needs a building permit also call for a Construction Supervisor License. Interior painting and finish flooring generally need neither.
Do I need a permit to replace trim or install cabinets?
Usually not. State guidance lists trim carpentry as not needing a permit, and the City of Boston says adding or replacing kitchen cabinets does not require one. That changes if the work touches gas or electrical lines, is part of a full kitchen renovation, or involves fire-rated assemblies.
Can you fix rot without replacing the whole porch or window?
Often, yes. We cut out decayed wood back to sound material and splice in new sections of rot-resistant stock, or use epoxy consolidant on small areas of detailed trim. If rot has reached a structural post, beam or sill plate, we tell you, and that repair goes through the permit process.
What should be in a contract for a small carpentry job?
For anything over $1,000 on your home, Massachusetts requires a written contract with specific provisions, including a payment schedule. The deposit is capped at one third of the price or the cost of custom materials, whichever is greater, and final payment is not due until the work is complete.
Is lead paint a concern for trim and door work?
In any Boston house built before 1978, yes. Cutting, sanding or planing old painted trim and doors makes lead dust. Massachusetts requires a licensed lead-safe renovation contractor for renovation, repair or painting in those homes, and we set up containment and cleanup accordingly.
Sources
Facts on this page were last checked against these sources on November 14, 2026.
- Mass.gov, HIC contractor resources (What work requires an HIC, CSL, or building permit?) (accessed 2026-11-14)
- Mass.gov, Learn about different Construction Supervisor Licenses (accessed 2026-11-14)
- Mass.gov, Lead-safe renovation for contractors (Department of Labor Standards) (accessed 2026-11-14)
- City of Boston, Install or replace kitchen cabinets (accessed 2026-11-14)
- City of Boston, How to get a Short Form permit (accessed 2026-11-14)
- City of Boston, How to get a Long Form permit (accessed 2026-11-14)