How the Mass Save program works
Mass Save is a statewide energy efficiency brand. The offers come from what the program calls its Sponsors. On the eligibility tabs we read, those are Berkshire Gas, Cape Light Compact, Eversource, Liberty, National Grid and Unitil, depending on who supplies your gas or electricity. If your electricity comes from a municipal light plant, the assessment page says your municipal utility is not part of the Mass Save program and you should contact it directly. The HEAT Loan page adds one exception: municipal electric customers can use the loan if the home is heated with natural gas from a Sponsor.
The program is not a single check. It is a set of separate offers, each with its own rules, and they connect through the Home Energy Assessment. Think of the assessment as the front door. It produces the report that says which incentives your house qualifies for, and several offers will not pay unless that report exists.
A contractor like us sits outside that system. We can build the addition, open the walls, replace the trim or frame the attic floor. Whether a given piece of work earns an incentive is decided by the program, through its own process and its own participating contractors. When a homeowner asks us to quote work that they hope to get money back on, we tell them to confirm the path with Mass Save first.
Mass Save rebates available as of November 2026
These are the offers that matter most to a renovation, summarized from masssave.com as we found it on November 16, 2026. Figures are the program’s, not ours.
| Offer | What the program page says | Main condition |
|---|---|---|
| Insulation and air sealing | 75 to 100 percent off approved improvements | Approved scope, usually after an assessment |
| Targeted air sealing | No cost | Listed among assessment outcomes |
| Windows | $75 per window | Replacing single-pane with ENERGY STAR Most Efficient, after verification |
| HEAT Loan | 0% financing up to $25,000 total | Lender approval, application before work |
| Income-based offers | No-cost insulation and air sealing, plus appliances and more | Household income limits |
| Heat pumps | Rebates plus access to 0% financing | Equipment and installer rules on the program site |
Two footnotes sit under every one of these. The eligibility tab on the insulation page says some restrictions apply and offers are subject to change or cancellation. It also says eligibility for some rebates is based on what the assessment finds. Treat this table as a starting point and confirm on the program site before you count on a number.
Mass Save insulation and air sealing
This is the biggest offer for most older homes, and the one that ties most closely to construction work. The insulation page frames air sealing as usually the first step, closing leaks in places such as attics, basements and between joists. It lists benefits including heating and cooling costs lowered by up to 15 percent, fewer drafts, less outside noise and a lower chance of ice dams.
The page gives three ways in:
- Call 866-527-SAVE, or enter your zip code and heating fuel on the site, to reach the lead vendor for your area and book an assessment
- Choose a participating Home Performance Contractor, who can do the assessment and then come back to install the recommended insulation and air sealing
- Choose a Direct Weatherization contractor if you already know what you want. The assessment page says this path lets you skip the assessment and work with that installer to scope the job and reach incentives
After the work, the assessment page says a quality assurance inspection is performed by the program’s lead vendors.
What this means for a remodel is mostly about sequencing. If you are opening a top-floor ceiling, gutting a kneewall room or rebuilding an attic stair, there is a window when the attic floor and wall cavities are exposed. That is often the cheapest moment to air seal and insulate, and it is also the moment when program work has to fit in. Sort out who is doing the insulation, and whether it is going through the program, before demolition starts. Our drywall and insulation page covers the building side of that work. If ice dams are the reason you are calling, read our guide on how to prevent ice dams too.
Mass Save windows and window replacement rules
The window rebate is narrower than many people expect. The windows page says you can save $75 per window when you replace single-pane windows with ENERGY STAR Most Efficient certified windows. The rest of the page sets the conditions:
- Your existing windows must be verified during a Home Energy Assessment, and the Energy Specialist confirms how many you can replace
- If the assessment finds that air sealing and insulation upgrades are needed, you must complete them to receive the window incentive
- New windows must be ENERGY STAR certified for the Northern Region and appear on the Most Efficient list, which the program publishes at MassSave.com/WindowQPL
- The offer covers purchases from January 1, 2026 through December 31, 2026, and existing windows must be verified within two years of applying
- Applications for 2026 rebates, with all materials, must be postmarked or submitted online by February 28, 2027
- The Sponsor may inspect installations before paying, projects are picked at random, and refusing an inspection can cost you the rebate
The same page estimates that a typical home can save $101 to $583 a year by replacing single-pane windows with Most Efficient models.
So the rebate rewards one specific situation: old single-pane sash, a qualifying replacement unit, and a house that has had its weatherization done. Double-pane windows from the 1990s do not fit the offer as written. Neither does a window bought before the assessment verified the old ones. If you are planning a window job, book the assessment first, keep the verification paperwork, and pick units from the qualifying list. Our windows and doors page covers installation, trim and the lead rules that apply to old sash.
How the HEAT Loan works
The HEAT Loan is the program’s 0% financing. As of November 2026 the financing page says eligible customers may receive 0% financing up to $25,000 total for qualifying upgrades. Its chart lists weatherization, pre-weatherization barriers, ENERGY STAR replacement windows (only together with completed weatherization recommendations), residential batteries enrolled in ConnectedSolutions, heat pump projects and heat pump water heaters. The $25,000 cap applies over the lifetime of a customer’s upgrades, not per project.
The steps on the page, in order:
- Confirm eligibility. The applicant must be the homeowner and have a residential gas or electric account with a Sponsor
- Complete a Home Energy Assessment. It is mandatory for whole home heat pumps, partial home heat pumps when seeking bonus incentives, windows, weatherization and weatherization barriers
- Get a signed proposal on the contractor’s letterhead. The program recommends several quotes from licensed and insured contractors
- Apply online with the signed proposal before any work begins
- Take the Authorization Form to a participating lender. Work may begin only after you have both the Authorization Form and a formal lending commitment
- Pay the contractor with the two-party check from the lender, apply for any rebates, and complete the required verification inspection
The page also says that starting January 1, 2027, 7-year terms will be available to income-verified customers or customers in qualified areas, and 5-year terms to others, with approved terms set during application review.
For a renovation, the loan only covers the energy measures. If a kitchen and bath remodel includes some attic insulation, only the insulation is a candidate for the loan. Ask your contractor to price the qualifying work as its own line item so the paperwork is clean.
Income-based offers
The income-based page describes two tracks. The Income Eligible Program gives eligible homeowners and renters no-cost insulation and air sealing, plus some new appliances and heating systems. Enhanced Residential Offers give eligible homeowners a no-cost home energy improvement package with managed services for weatherization, heat pumps and more.
The page publishes household income limits for the 2026 to 2027 heating season and has a zip code lookup for local limits. Two rows from the table as shown on November 16, 2026:
- Household of 2: up to $70,073 for the Income Eligible Program, and $70,074 to $93,431 for enhanced incentives
- Household of 4: up to $103,049 for the Income Eligible Program, and $103,050 to $137,399 for enhanced incentives
If your income is above those lines, the page says you can still use the other Mass Save incentives.
Heat pump rebates, briefly
People search for the Mass Save heat pump rebate more than almost anything else on the program. The heat pumps page says the Sponsors offer rebates on air source, air to water and ground source heat pumps, plus a chance to apply for 0% financing, and it offers a no-cost virtual consultation with a Decarbonization Specialist. It also recommends weatherization first. We do not install heating or cooling equipment, so we will not guess at amounts here. Read the program page and talk to an installer from its contractor network.
How Mass Save rebates fit a renovation
Most of our projects are not energy projects. They are additions, kitchen remodels, new siding or a full gut of a two-family. The program still touches them in a few predictable ways.
- Attic and top-floor work. When ceilings come down or an attic gets a new floor, insulation and air sealing can go in while the framing is open. Decide early whether that insulation goes through the program
- Exterior walls. New siding is a moment to look at empty wall cavities, since insulation can be blown in from outside while the siding is off. Coordinate the order with whoever does the insulation
- Windows. Verification has to happen before replacement, not after
- Lead paint. Insulating, replacing windows and opening walls in a house built before 1978 disturbs painted surfaces. The Department of Labor Standards says paid renovation work that disturbs more than 6 square feet of painted surface per room inside, or more than 20 square feet outside, must be done by a licensed lead-safe renovation contractor. Our Massachusetts lead paint law guide explains the rules
- New construction and additions. Rebates for existing homes are separate from the energy code your town enforces on new work. See our guide to the Massachusetts stretch energy code
For a whole-house project, the cleanest approach is to get the assessment done before design is final. The report tells you what the program will support, and the design can leave room for it. Our whole home renovation page explains how we stage that kind of job.
Where to apply: the Mass Save rebate portal
Rebate forms live on the program site. The windows page has a link to submit the rebate online or print and mail the form, and the financing page directs customers to MassSave.com/savings to apply for available rebates after the work is done. For anything run through the assessment, the lead vendor or participating contractor handles much of the paperwork.
Keep copies of everything: the assessment report, the verification of existing windows, the contractor proposal, invoices and product labels. Several offers allow an inspection before payment,, and a missing document can hold up or cost you a payment.
A short checklist before you sign
- Confirm the current offer on masssave.com and note the date you checked
- Book the Home Energy Assessment before you buy windows or close up walls
- Ask whether your contractor can do the work under the program, or whether it should go to a participating contractor
- Get the energy work priced as its own line item
- If the house was built before 1978, confirm the contractor’s lead-safe renovation license
- Apply for HEAT Loan financing before work starts, never after
If you want a renovation planned around an assessment you already have, contact us and send the report along with your project notes.
This guide is general information for homeowners, not legal advice. Rules change and vary by city or town. Confirm details with your local building department or the state agency listed in the sources.
Common questions
Is Boston Contractors Group part of Mass Save?
No. We are a general contractor. Mass Save is run by its Sponsors, which are utilities and energy efficiency providers. We do not administer, approve or pay rebates, and the current terms are always the ones on masssave.com.
Do I need a Home Energy Assessment to get Mass Save rebates?
For most of the big ones, yes. The window rebate requires your existing windows to be verified during an assessment, and the HEAT Loan requires one for windows, weatherization and some heat pump projects. The program also lists a direct weatherization path that skips the assessment for insulation and air sealing.
How much does Mass Save pay for insulation?
As of November 2026 the program lists 75 to 100 percent off approved insulation and air sealing improvements, with no-cost upgrades for income-eligible households. The exact amount depends on your home and the approved scope.
Can I get the window rebate for any new window?
No. The page says the new windows must be ENERGY STAR certified for the Northern Region and on the Most Efficient list, they must replace single-pane windows, and you must complete the weatherization recommendations from your assessment.
What is the deadline for 2026 window rebates?
The windows page says the rebate covers purchases from January 1 through December 31, 2026, and applications with all materials must be postmarked or submitted online by February 28, 2027.
Can the HEAT Loan pay for a whole renovation?
No. It covers qualifying energy efficiency measures such as weatherization, pre-weatherization barriers, certain windows, heat pumps and heat pump water heaters, up to $25,000 total over the life of your upgrades. Kitchens, finishes and structural work are separate.
Sources
Facts on this page were last checked against these sources on November 16, 2026.
- Mass Save, Insulation and Air Sealing (accessed 2026-11-16)
- Mass Save, Windows (accessed 2026-11-16)
- Mass Save, 0% Interest Financing (HEAT Loan) (accessed 2026-11-16)
- Mass Save, Home Energy Assessments (accessed 2026-11-16)
- Mass Save, Income-Based Assistance (accessed 2026-11-16)
- Mass Save, Heat Pumps (accessed 2026-11-16)
- Mass.gov, Lead-safe renovation for homeowners (Department of Labor Standards) (accessed 2026-11-16)