Massachusetts Stretch Energy Code: Base, Stretch and Specialized Codes Explained

The Massachusetts stretch energy code is one of three energy code levels a city or town can be on, and which one applies depends entirely on where you build. Boston, Cambridge, Newton and about sixty other municipalities have gone a step further and adopted the Specialized Code. Quincy, Waltham and Lynn use the Stretch Code. A few dozen towns are still on the Base Code. This guide explains the three tiers using the Department of Energy Resources (DOER) pages and adoption list we checked on November 16, 2026, and what each means for a new house or addition.

Updated November 16, 2026 · Licensing & Permits

The three energy code tiers in Massachusetts

Every city and town in Massachusetts is on one of three energy codes. DOER’s Massachusetts Building Energy Codes page lays them out like this:

Tier Residential rule What it is
Base Code 780 CMR Chapter 11R The 2021 IECC with Massachusetts amendments, part of the 10th edition state building code
Stretch Code 225 CMR Chapter 22 Opt-in. The 2021 IECC with key Massachusetts amendments
Specialized Code 225 CMR Chapter 22 plus Appendix RC Opt-in. The Stretch Code with an added appendix

Commercial, multifamily and other buildings outside the low-rise residential rules follow the parallel commercial codes: 780 CMR Chapter 13 for the Base Code, and 225 CMR 23.00, with Appendix CC for the Specialized Code.

A municipality chooses its tier by adopting it locally. DOER’s Building Energy Code page says municipalities may adopt the Stretch Code in place of the Base Energy Code. The Specialized Code is a further opt-in. Either way, the code that applies to your project is the one your city or town has adopted with an effective date before your permit.

What is the Massachusetts stretch energy code?

Massachusetts was early here. According to DOER, the state became the first in the country in 2009 to adopt an above-code appendix to its base energy code, which became known as the Stretch Code. For years it lived in the state building code, first at 780 CMR 110.aa and then 780 CMR 115.aa, under the Board of Building Regulations and Standards.

The Climate Act of 2021 changed that. It moved authority for the Stretch Code to DOER and, at the same time, required DOER to develop a new municipal opt-in Specialized Code. The updated Stretch Code now sits in two regulations that follow the IECC format: 225 CMR 22.00 for low-rise residential and 225 CMR 23.00 for commercial, multifamily and other buildings.

The design idea has not changed. The regulation summary says the Stretch Code is an overlay to the base energy code that emphasizes energy performance instead of prescriptive requirements, and is meant to produce cost-effective construction that is more efficient than the base code.

A few dates help explain why you see “2023” and “2024” attached to the code in search results:

  • The Specialized Code became available for local adoption in December 2022
  • The current residential Stretch Code had been in place since January 1, 2023, according to DOER’s 2024 listening session notice
  • Redlines from 2024 public comments took effect on February 15, 2025, and DOER posts the current Stretch and Specialized code text as of February 14, 2025

The specialized stretch code in Massachusetts

The Specialized Code is the newest and strictest tier. The 225 CMR 22.00 summary says it is required by state law to help meet Massachusetts greenhouse gas limits and building sector sub-limits, and is designed so that new construction is consistent with a net-zero economy in 2050. It gets there mainly through energy efficiency that reduces heating loads, and through efficient electrification.

DOER’s Climate Leader Communities page puts it the same way. All compliance pathways under the Specialized Code are designed around 2050 net-zero goals, primarily through deep energy efficiency, reduced heating loads and efficient electrification.

For a builder or homeowner, the practical point is that the Specialized Code puts more weight on electrification, so a new house’s heating and fuel choices matter more there than under the Stretch Code alone. The specific pathways and their conditions are written into Appendix RC of 225 CMR 22.00 and explained in DOER’s Stretch Energy and Municipal Opt-In Specialized Building Code FAQ. Read those documents, or have your designer walk you through them, before you settle on a heating system or fuel for a new home in a Specialized Code town.

Massachusetts stretch code towns: who uses which tier

DOER’s adoption page tracks all 351 municipalities. As of October 27, 2026, it reports:

  • 241 municipalities have adopted the Stretch Code since 2010, a figure that does not include towns that have also adopted the Specialized Code
  • 61 municipalities have adopted the Specialized Code since 2023
  • 58.91 percent of Massachusetts residents live in a Stretch Code community
  • 33.76 percent live in a Specialized Code community
  • 7.32 percent live in a Base Code community

Here is how the Boston area breaks down in DOER’s municipal table, downloaded from the adoption page on November 16, 2026.

Municipality Stretch Code since Specialized Code effective
Boston July 1, 2011 January 1, 2024
Cambridge July 1, 2010 July 1, 2023
Somerville January 1, 2012 July 1, 2023
Brookline January 1, 2011 July 1, 2023
Watertown July 1, 2011 July 10, 2023
Newton July 1, 2010 January 1, 2024
Arlington July 1, 2011 January 1, 2024
Lexington January 1, 2011 January 1, 2024
Wellesley January 1, 2012 January 1, 2024
Medford January 1, 2011 July 1, 2024
Needham July 1, 2019 July 1, 2024
Belmont January 1, 2012 January 1, 2025
Milton July 1, 2011 January 1, 2025
Dedham January 1, 2011 January 1, 2025
Framingham January 1, 2014 July 1, 2026
Canton July 1, 2017 January 1, 2027

Plenty of nearby cities are on the Stretch Code without the Specialized Code, including Quincy, Waltham, Malden, Revere, Everett, Chelsea, Lynn, Braintree, Weymouth, Woburn and Winthrop. Communities listed on the Base Code in the same table include Danvers, Hull, Lynnfield, North Reading, Wilmington, Taunton and Fall River.

Two cautions. Canton’s Specialized Code date is in the future as of this writing, so a project there may fall under different rules depending on when the permit is filed. And towns keep voting. Check the live table before you design.

Why towns opt in

DOER ties each tier to a state program. Stretch Code adoption is required to become a designated Green Community under the Green Communities Act of 2008 and to qualify for Green Community competitive grants. Specialized Code adoption is required to become a Climate Leader Community and to qualify for Climate Leader Accelerator or Technical Assistance grants.

You can see the history in the table. Stretch Code dates go back to 2010, while Specialized Code dates start in 2023. Every certified Climate Leader has to adopt the Specialized Code, so that list grows as more towns seek the designation.

What it means for building a new home

The energy code matters most when you build something new. A new single-family home, an ADU or a large addition gets reviewed against your town’s tier at permit time.

Because the Stretch Code is performance based, plan on energy performance work, such as modeling, being part of the design process instead of an afterthought. DOER supports that work with technical guidance, most recently updated on September 30, 2025, and attachments on envelope performance and thermal bridging, simulation guidelines, an embodied carbon insulation calculator and low-carbon concrete mixes available in Massachusetts.

DOER also runs a no-cost peer review for projects using the Thermal Energy Demand Intensity, or TEDI, compliance path in Stretch and Specialized Code communities. The service reviews TEDI energy models and thermal bridge calculations, as part of a study DOER is sponsoring.

What this means in practice:

  • Pick the energy approach during schematic design, not after framing drawings are done
  • In a Specialized Code town, settle the heating and fuel plan early, since it shapes the compliance path
  • Budget for design and consultant time on energy compliance, not only for the walls, windows and mechanical equipment
  • Ask your building department what documents they want with the permit application

If you are pricing a new house, our guide to the cost to build a house in Massachusetts covers the other major line items, and our custom homes page explains how we run design and construction together.

Renovations, additions and the base building code

The energy code is one part of a larger state building code. DOER’s page notes that the 10th edition of 780 CMR is the current Massachusetts building code. The 10th edition took effect on October 11, 2024 with a concurrency period, and that period ended June 30, 2025, when the 10th edition became the only building code in effect. Our Massachusetts building code guide covers the rest of it.

How energy rules apply to an addition or alteration depends on the scope of work and is set out in the code text itself. Do not assume a renovation is exempt, and do not assume it triggers the same requirements as new construction. Raise it with your designer and the building department before plans are drawn. If your contractor also needs to be properly licensed for the job, our Massachusetts contractor license guide explains the Construction Supervisor License and HIC registration.

Energy code vs Mass Save incentives

People mix these up, so it is worth separating them. The energy code is law, enforced through permits and inspections. Mass Save is a voluntary efficiency program run by utility Sponsors, with incentives for existing homes such as insulation and window rebates. They are separate systems with separate rules.

The two do connect in one place. DOER says the Mass Save program, working with the BBRS and DOER, sponsors training on the building energy code, including the Stretch and Specialized codes, around the state. The training is free for building officials and counts toward their energy training requirement. For the incentive side, see our Mass Save rebates guide.

Changes proposed in 2026

The code keeps moving. DOER’s Massachusetts Building Energy Codes page says it released a series of proposed revisions to the Stretch and Specialized codes, covering both residential and commercial sections, which it describes as modest. It held a public hearing on Zoom on June 16, 2026 and accepted written comments until June 24, 2026. Clean and redline versions of the proposed residential and commercial text are posted, along with an explainer dated February 3, 2026.

As of our check, that page does not list an effective date for these revisions. If your project is in design now, ask your designer to confirm which version will apply on the date you expect to file for a permit.

A quick checklist

  1. Look up your town on DOER’s adoption table and note both dates
  2. Check whether a Specialized Code date is pending
  3. Download the current 225 CMR 22.00 and DOER’s FAQ and give them to your designer
  4. Decide the heating and fuel approach early in a Specialized Code town
  5. Confirm with the building department what the permit submission needs

Planning a new home or addition and want help reading what your town requires? Contact us with the address and a rough scope.

This guide is general information for homeowners, not legal advice. Rules change and vary by city or town. Confirm details with your local building department or the state agency listed in the sources.

Common questions

What is the stretch code in Massachusetts?

It is an opt-in energy code that a municipality can adopt in place of the Base Energy Code. DOER describes it as emphasizing energy performance rather than prescriptive requirements, and designed to produce cost-effective construction that is more efficient than the base code. The residential version is 225 CMR 22.00.

Is Boston on the stretch code or the specialized code?

The Specialized Code. DOER's adoption table lists Boston with a Stretch Code date of July 1, 2011 and a Specialized Code effective date of January 1, 2024.

How do I find out which energy code my town uses?

Use DOER's Building Energy Code Adoption by Municipality page on mass.gov. It has a searchable table of all 351 municipalities with effective dates, a downloadable CSV and a PDF map. Your local building department can confirm what applies to a permit.

Why do towns adopt the stretch code?

Stretch Code adoption is required to become a designated Green Community and qualify for Green Communities grants. Specialized Code adoption is required to become a Climate Leader Community and qualify for Climate Leader grants.

Is the stretch code the same as Mass Save?

No. The energy code is a legal requirement enforced through building permits. Mass Save is a utility-run efficiency program with voluntary incentives. DOER does note that the Mass Save program, with the BBRS and DOER, sponsors energy code training.

Are the stretch and specialized codes changing again?

DOER released proposed revisions in 2026 and took public comment through June 24, 2026. Check DOER's Massachusetts Building Energy Codes page for whether and when any changes take effect.

Sources

Facts on this page were last checked against these sources on November 16, 2026.

  1. Mass.gov (DOER), Building Energy Code (accessed 2026-11-16)
  2. Mass.gov (DOER), Massachusetts Building Energy Code Adoption by Municipality (accessed 2026-11-16)
  3. Mass.gov (DOER), Municipal Energy Code List (CSV, November 3, 2026) (accessed 2026-11-16)
  4. Mass.gov (DOER), Massachusetts Building Energy Codes (accessed 2026-11-16)
  5. Mass.gov (DOER), Stretch Energy Code Development (accessed 2026-11-16)
  6. Mass.gov, 225 CMR 22.00 Massachusetts Stretch Code and Specialized Code for low-rise residential (accessed 2026-11-16)
  7. Mass.gov (DOER), Climate Leader Communities (accessed 2026-11-16)

Ready to start your project?

Free, no-pressure estimates in Boston and across Massachusetts.