Replacement Windows Melrose MA: Old Sash, Online Permits and Downtown Review

Replacement windows Melrose MA homeowners shop for usually go into houses built before the Second World War. More than half the city's housing predates 1940, so the old sash are often original wood with lead paint on every surface. Melrose files window permits online, charges triple if work starts without one, and in its downtown district asks the Historic District Commission to approve visible changes first. Here is what that means for a window project, with prices left to the actual measurements.

Why replacement windows Melrose MA houses need start with the year built

Melrose is one of the older housing markets north of Boston. The Census Bureau’s 2020 to 2024 survey counts 12,771 housing units, and 52.2 percent of them were built before 1940. Another 17.9 percent went up between 1940 and 1959. Only 8.9 percent date from 2000 or later.

For window work, the build year tells us three things before we measure anything:

  • The sash are likely wood, possibly original, and possibly weighted with ropes and pulleys in hollow pockets beside the frame.
  • Every painted surface around them, from sash to stops to sills and exterior casings, should be treated as lead paint until a test says otherwise.
  • The rough openings may be out of square after a century of settling, which affects whether an insert fits or a full-frame replacement is needed.

Single family detached houses hold 53.0 percent of Melrose units, and buildings with five or more units hold 27.6 percent. In a condo building, the association usually decides on window style, color and sometimes the supplier, so check the master deed before getting quotes.

Permits through SimpliCity, and the cost of skipping one

Massachusetts treats window replacement as permit work. The state’s home improvement chart lists installing or replacing a window as needing a building permit, a Construction Supervisor License with window and siding as the minimum license type, and Home Improvement Contractor registration when the home is owner occupied with one to four units.

Melrose takes building, electrical, mechanical, plumbing and gas applications online through its SimpliCity portal, and contractors upload their license, HIC registration, workers compensation affidavit and insurance certificate with the application. The city’s permitting guide says design plans should show room dimensions, stairs, door and window sizes and elevations, along with an accurate total cost that counts every trade.

The fee schedule, effective July 1, 2023, is easy to estimate from:

  1. A $15 administrative fee on every application.
  2. $15 per thousand dollars of total cost for one and two-family construction or alteration, with a $40 minimum.
  3. $17 per thousand on other buildings, with a $120 minimum.

So a $12,000 window job on a single family house carries a $180 permit fee plus the $15 administrative charge. The same schedule charges a triple fee when work starts before a permit, which makes a skipped permit an expensive shortcut.

Melrose MA window replacement in the historic districts

Melrose has two local historic districts under Chapter 131 of the City Code. The Downtown Melrose Historic District runs along Main Street from Foster Street to Emerson Street and includes part of Essex Street. The Benjamin Lynde House Historic District was added on June 15, 2026.

Inside them, the Historic District Commission reviews exterior changes visible from a public way, and it can consider the kind, color and texture of materials and the style of windows and doors. The Building Commissioner will not issue a building permit there until the commission has issued a Certificate of Appropriateness.

Outside those districts, Melrose’s demolition review ordinance reaches buildings built in 1899 or earlier, among other categories, but only when someone proposes removing 50 percent or more of the exterior surface area. Replacing windows does not come close to that.

Lead-safe work on prewar sash

The state’s lead-safe renovation rules apply to paid work in a pre-1978 home that disturbs more than 6 square feet of painted surface per room inside, or more than 20 square feet outside. Removing a single old double-hung window and its stops usually crosses the interior line in that room, and the exterior casing work adds to it. On a Melrose house from the 1920s, we set up containment, use lead-safe methods and clean up to the standard the rule requires on every opening.

That is also why the repair or replace question deserves a real answer here. On a house with sound frames, restored sash with good storm windows can be the right call. On a house where the frames are rotted or someone already installed failing replacement units in the 1980s, new windows usually win.

Energy code and rebates

Melrose has been on the Stretch Code since January 1, 2011 and on the municipal opt-in Specialized Code since July 1, 2024, per the state DOER list. The city says it reviews building applications against the 2021 International Energy Conservation Code. For replacement windows, that mostly affects the performance ratings of the units we specify, and for an addition it shapes the whole wall.

Rebates are a separate question. Mass Save offers depend on your utility and the rules in force when you buy. Its windows page, as checked in November 2026, is aimed at replacing single-pane windows with ENERGY STAR Most Efficient units, and it requires a Home Energy Assessment to verify the old windows plus completion of the weatherization recommendations. A house that already has double-pane units may not fit that offer, so check eligibility before counting on a rebate.

Doors count too

Exterior doors follow similar rules. The state chart lists door replacement as needing a Construction Supervisor License and HIC registration, and a permit when the door is an exit or raises a safety concern. On a two-family, the front and back doors are often the exits for both units, so we treat them as permit work.

More on materials and options is on our windows and doors page and the statewide windows guide. See also the window replacement cost guide and the Melrose overview. Then contact us with the address, the number of windows and a photo of the worst one.

How a windows & doors project works with us

  1. Call or request an estimate

    Tell us what you need and roughly when.

  2. On-site visit

    We look at the space, measure and talk through options.

  3. Written estimate

    A clear scope, price and schedule, line by line.

  4. Permits & build

    We file permits, do the work, pass inspections and walk it through with you.

More about replacement windows boston and windows & doors across Massachusetts, or see every service we offer in Melrose.

Frequently asked questions

Do I need a permit for replacement windows in Melrose?

Yes. The state's home improvement chart lists window installation or replacement as needing a building permit, a Construction Supervisor License with window and siding as the minimum, and HIC registration on owner-occupied homes of one to four units. In Melrose the application goes through SimpliCity, and work started without a permit is charged a triple fee.

What does a Melrose window permit cost?

For a one or two-family home, the city's schedule charges $15 per thousand dollars of total cost with a $40 minimum, plus a $15 administrative fee on every application. On that schedule, a $12,000 window job comes to $180 plus the $15 fee. Larger buildings are charged $17 per thousand with a $120 minimum.

My building is on Main Street downtown. What changes?

The Downtown Melrose Historic District runs along Main Street from Foster Street to Emerson Street and includes part of Essex Street. Visible exterior changes there need a Certificate of Appropriateness from the Historic District Commission before the Building Commissioner issues the permit, and the commission can consider window style.

Are Mass Save rebates available for windows in Melrose?

It depends on your utility and the rules when you buy. The Mass Save windows page, as checked in November 2026, covers replacing single-pane windows with ENERGY STAR Most Efficient windows, requires the old windows to be verified during a Home Energy Assessment and requires finishing the weatherization recommendations. Check eligibility first.

Can I keep my old sash and add storm windows instead?

Often, yes, and on a prewar house it is worth pricing. Restored sash with good storms can make sense where the frames are sound. Any paid work that disturbs more than 6 square feet of paint per room inside, or 20 square feet outside, still needs a licensed lead-safe renovation contractor.

Sources

Facts on this page were last checked against these sources on November 17, 2026.

  1. City of Melrose, Online permits (SimpliCity) (accessed 2026-11-17)
  2. City of Melrose, Permitting guide and common questions (Wayback Machine archive, August 11, 2025) (accessed 2026-11-17)
  3. City of Melrose, Permit fees (Wayback Machine archive, August 11, 2025) (accessed 2026-11-17)
  4. City of Melrose, Inspection Services (Wayback Machine archive, August 11, 2025) (accessed 2026-11-17)
  5. City of Melrose, Historic District Commission (accessed 2026-11-17)
  6. City of Melrose, Historic Districts Ordinance (2026) (accessed 2026-11-17)
  7. US Census Bureau, ACS 2020 to 2024 5-year, B25034 year structure built (accessed 2026-11-17)
  8. US Census Bureau, ACS 2020 to 2024 5-year, B25024 units in structure (accessed 2026-11-17)
  9. Massachusetts DOER, Municipal energy code list (CSV, November 3, 2026) (accessed 2026-11-17)
  10. Mass.gov, HIC contractor resources (What work requires an HIC, CSL or building permit) (accessed 2026-11-17)
  11. Mass Save, Windows rebate page (accessed 2026-11-17)
  12. Mass.gov, Lead-safe renovation for homeowners (accessed 2026-11-17)

Windows & Doors in Melrose? Let's talk.

Free, no-pressure estimates in Boston and across Massachusetts.