Siding Contractors Arlington MA: Hearings, Lead Paint and Permits

Siding contractors Arlington MA homeowners talk to should ask one question before they quote: is the house on the town's historic inventory? Re-siding is the exterior job most likely to cross the Historical Commission's 25 percent threshold, because a single wall is a whole elevation. Add lead paint on clapboards that are often more than eighty years old, and the order of work matters as much as the material. This page walks through both.

Siding contractors Arlington MA owners hire should start at the address

Before anyone talks about cedar versus fiber cement, look the house up. Arlington’s Historical Commission keeps its Inventory of Architecturally and/or Historically Significant Properties by street address. A property lands on it when it appears on a state list or sits inside a National Register district. Paper copies are at Robbins Library, the Building Department and the Planning Department. The Commission notes that a buyer still has to come before it even if a real estate agent never mentioned the listing.

Then check the seven local historic districts: Avon Place, Broadway, Central Street, Jason/Gray, Mount Gilboa/Crescent Hill, Pleasant Street and Russell. Together they cover more than 300 properties, and they answer to the Arlington Historic District Commissions rather than the Historical Commission. Most houses are in neither group, and for them siding is a building permit and a good installer. For the rest, the paperwork shapes the schedule.

Why siding crosses the 25 percent line so easily

For an inventoried building, any exterior change that affects more than 25 percent of a front or side elevation needs a public hearing. Roof or window work can stay under that line. Siding rarely does. Strip one side wall and you have changed all of it. On a corner lot the Commission counts every elevation, because the back of the house faces a street.

At a hearing the Commissioners look at the building materials an owner plans to use, the styles of windows and doors and the siding materials. Their published principles, adapted from the federal standards for historic properties, name siding design and materials among the distinctive features worth keeping. They prefer repair over replacement. If a feature is too deteriorated to save, the new one should match the old in design and material, including texture and other visual qualities. They also ask owners to document existing features with photographs or samples before removal.

In practice, a plan to patch rotted clapboards and replace them with matching wood is an easier hearing than a plan to wrap the house in a different product. Owners can ask for an informal hearing to get early feedback before the design is settled, though no vote is taken there.

The consequence of skipping this step is a year. If the Commission does not approve and the owner will not revise, the Building Department denies the permit, and it cannot be obtained for one year.

Inside a local historic district

The district commissions review most proposed exterior changes, from minor alterations to new additions to the removal of trim. Corner boards, window casings and cornice returns are exactly the kind of trim that disappears in a careless re-siding job, so plan to keep or replicate them.

Two things are outside district review under the town bylaw. Paint color is one, so a new color on restored siding is your call. Storm windows and storm doors are another. The Historical Commission likewise says it has no say over paint color.

Lead paint on old clapboards

Arlington’s housing is old even by Massachusetts standards. Census estimates for 2020 to 2024 put 47.1 percent of units before 1940, 18.4 percent in the 1940s and 1950s and 20.4 percent in the 1960s and 1970s. That is roughly 86 percent built before 1980, and most of those walls carry layers of paint from before the 1978 ban.

Under state and federal rules, paid work on a pre-1978 home that disturbs more than 20 square feet of exterior paint has to follow lead-safe work practices, done by a licensed and certified renovator. Removing painted siding, scraping trim and cutting into painted sheathing all count. Expect ground sheeting, containment and cleanup verification to be part of the price, not an extra.

Permit, license and fee

State guidance lists siding as work that needs a building permit, Home Improvement Contractor registration on owner-occupied homes of one to four units, and at least the Specialty Construction Supervisor License for windows, doors and siding. That license also covers replacing up to 25 percent of the sheathing, which matters on houses where the boards behind the clapboards have rotted at the sills.

Permits are issued by the town through Inspectional Services and filed in OpenGov ViewPoint. Arlington’s schedule sets building permits at $20 per $1,000 of estimated cost, with a $50 minimum. A $30,000 re-siding job carries a $600 permit. Starting before the permit is issued triples the fee, and a dumpster or pod permit adds a flat $24.

Two-families and shared walls

Two-unit buildings hold 23.9 percent of Arlington’s housing units. When the two units are separate condos, the siding usually belongs to both owners, and a contract signed by one may not bind the other. We ask for both signatures, or the association’s written approval, before we schedule a start date.

Wall insulation while the walls are open

Removing siding exposes the sheathing and, on many older houses, empty or slumped wall cavities. That is the cheapest moment to air seal and insulate. Arlington is not on the state’s list of municipal light plants, so Mass Save offers may apply depending on your own utility accounts. The program lists 75 to 100 percent off approved insulation and air sealing.

If you plan to add rigid foam under the new siding, settle the window and trim details first, because the wall gets thicker. Arlington’s Specialized Code, in effect since January 1, 2024, is aimed at new construction according to the town’s joint energy site, but ask Inspectional Services how your scope will be reviewed.

See our siding services and the Massachusetts siding guide for materials and costs. If the roof is also due, read our Arlington roofing page. Larger projects are covered on the whole house remodeling page for Arlington, and you can contact us with your address to start.

How a siding project works with us

  1. Call or request an estimate

    Tell us what you need and roughly when.

  2. On-site visit

    We look at the space, measure and talk through options.

  3. Written estimate

    A clear scope, price and schedule, line by line.

  4. Permits & build

    We file permits, do the work, pass inspections and walk it through with you.

More about siding contractors boston and siding across Massachusetts, or see every service we offer in Arlington.

Frequently asked questions

Does replacing siding on one side of my Arlington house need a hearing?

If the house is on the Inventory of Architecturally and/or Historically Significant Properties and the wall is a front or side elevation, very likely. Re-siding a full wall changes far more than 25 percent of it. A rear wall on an interior lot is a different case, but on a corner lot the rear faces a street and counts too.

Can I put vinyl or fiber cement over old wood clapboards?

On a house that is not inventoried and not in a district, that is a choice between you and the building code. On an inventoried house, the Commission looks at siding materials and favors repair, then replacement that matches the original in design and material. Bring the product details to the hearing.

Does the Historical Commission control paint color?

No. The Commission says it has no jurisdiction over paint color or landscaping, and the historic districts bylaw also leaves paint color out of the district commissions' review.

How much is a siding permit in Arlington?

$20 per $1,000 of estimated cost under the town's schedule, so a $30,000 siding job carries a $600 permit. The minimum on any permit is $50, and starting work without one triples the fee.

Should I insulate the walls while the siding is off?

It is often the easiest time. Arlington is not served by a municipal light plant, so Mass Save insulation offers may apply depending on your own utility accounts. Settle that before the crew closes the walls.

Sources

Facts on this page were last checked against these sources on November 17, 2026.

  1. Arlington Historical Commission, FAQs (accessed 2026-11-17)
  2. Town of Arlington, Historic Districts Commission (accessed 2026-11-17)
  3. Town of Arlington, Title VII Historic Districts bylaw (accessed 2026-11-17)
  4. Town of Arlington, Inspectional Services (accessed 2026-11-17)
  5. Town of Arlington, Schedule of Building Permit Fees (PDF) (accessed 2026-11-17)
  6. Mass.gov, HIC contractor resources (what work requires an HIC, CSL or building permit) (accessed 2026-11-17)
  7. Mass.gov, Learn about different Construction Supervisor Licenses (accessed 2026-11-17)
  8. Mass.gov, Lead-safe renovation for contractors (accessed 2026-11-17)
  9. US EPA, Renovation, Repair and Painting Program for contractors (accessed 2026-11-17)
  10. Mass Save, Insulation and Air Sealing (accessed 2026-11-17)
  11. Mass.gov DPU, Massachusetts municipally-owned electric companies (accessed 2026-11-17)
  12. Towns of Acton, Arlington and Lexington, Energy efficient and fossil fuel free building requirements (accessed 2026-11-17)
  13. US Census Bureau, ACS 2020 to 2024 5-year, B25034 year structure built (accessed 2026-11-17)
  14. US Census Bureau, ACS 2020 to 2024 5-year, B25024 units in structure (accessed 2026-11-17)

Siding in Arlington? Let's talk.

Free, no-pressure estimates in Boston and across Massachusetts.