Siding Newton MA jobs and the 50 percent rule
Newton’s historic preservation rules define demolition more broadly than most people expect. Partial demolition, in the City’s terms, means removing, altering or enveloping 50 percent or more of any single elevation or roof surface. For any building over 50 years old, that work goes to the Newton Historical Commission for review before the building permit is issued.
Envelop is the key word for siding. A crew that strips the clapboards off the front of a house has removed most of that elevation. A crew that installs new siding over the old one has enveloped it. In both cases the project has crossed the 50 percent line on that face, even if nothing structural moves. Re-siding the whole house crosses it on every face.
That does not mean the answer is no. It means the review is part of the job, and the schedule should allow for it. We gather photographs of each elevation, the age of the house and the proposed material before we file, because that is what a reviewer needs to make a quick call.
Which Newton houses are past the age line
Almost all of them. Census Bureau estimates for 2020 to 2024 put Newton’s median year built at 1942. 48.8 percent of its units were built before 1940, 18.2 percent between 1940 and 1959 and 12.9 percent between 1960 and 1979, so roughly four in five units are from before 1980, and nearly all of those are now more than 50 years old.
Newton’s housing is also more mid-century than people assume. A 2019 City Planning memo noted that, compared with Boston, Cambridge, Salem, Somerville and Worcester, Newton has the highest number of post-World War II neighborhoods and houses. Those postwar houses are now old enough for review too. Detached single family houses make up 54.8 percent of Newton’s units, which is why so much of the city’s exterior work is on freestanding wood-frame homes.
The four local historic districts
On top of the citywide review, Newton has four local historic districts: Auburndale, Chestnut Hill, Newton Upper Falls and Newtonville. Inside them, any exterior change to a building needs an application to the district commission, and that includes siding material, trim and the way corners and window casings are detailed. In-kind repair and ordinary maintenance may be approved by staff, which can make patching a rotted section of matching clapboard much faster than a full change of material.
The City points out that a district does not cover its whole village. An Auburndale or Newtonville mailing address is not proof the house is inside the district, so check the boundary on the City’s Assessing map with the historic properties layer turned on. The 2019 ordinance text also treated buildings within 150 feet of a district boundary as one category of historical significance for demolition review.
Permit, fee and inspections
Permits are issued by the City’s Inspectional Services Department at City Hall, 1000 Commonwealth Avenue, and filed online through OpenGov. The fee schedule, in effect since July 1, 2015, sets every permit type at $20 per $1,000 of estimated construction cost, rounded up to the nearest thousand. The residential minimum is $50. So a $44,200 re-siding job is treated as $45,000 and carries a $900 permit.
The City’s building page lists five building inspectors and uses its GIS browser to show which inspector covers an address. Inspector office hours are 7 to 9 a.m. and 3 to 4 p.m. Work hours are set by the City: 7 a.m. to 7 p.m. on weekdays and 8 a.m. to 7 p.m. on Saturdays, with Sundays and holidays requiring an approved waiver. Siding is noisy, so we plan the tear-off for weekdays.
Lead-safe tear-off
Most of Newton’s siding has been painted many times, and in a house built before 1978 some of those coats are likely lead-based. Under state and federal rules, paid work that disturbs more than 20 square feet of exterior paint on such a home has to follow lead-safe work practices under a certified renovator. On a full re-side that means ground sheeting, controlled removal, daily cleanup and a final check, all priced in.
Licensing and the contract
State guidance lists siding as needing a building permit, Home Improvement Contractor registration on owner-occupied homes of one to four units, and at least the Specialty Construction Supervisor License for windows, doors and siding. That license also allows replacing up to 25 percent of the sheathing. Any home improvement contract over $1,000 must be in writing.
Wall insulation and the energy code
Taking siding off is the cheapest chance to air seal and insulate the walls. Newton is not served by a municipal light plant, so Mass Save offers may apply depending on your own utility accounts. The program lists 75 to 100 percent off approved insulation and air sealing. Newton has been on the Specialized Code since January 1, 2024, so if foam board goes under the new siding, we confirm with Inspectional Services how the wall will be reviewed.
For materials and costs, see our siding services and the Massachusetts siding guide. If the walls are open, our Newton home insulation page covers the energy side. The Newton roofing page and Newton town page cover the rest of the exterior, and you can contact us with your address and photos.
How a siding project works with us
Call or request an estimate
Tell us what you need and roughly when.
On-site visit
We look at the space, measure and talk through options.
Written estimate
A clear scope, price and schedule, line by line.
Permits & build
We file permits, do the work, pass inspections and walk it through with you.
More about siding contractors boston and siding across Massachusetts, or see every service we offer in Newton.
Frequently asked questions
Does new siding need Historical Commission review in Newton?
Often, if the house is more than 50 years old. Newton defines partial demolition to include enveloping 50 percent or more of any single elevation, and covering a wall with new siding does that. The review happens before the building permit, so file early.
My house is in Newtonville but not in the historic district. Which rules apply?
The City notes that its four local historic districts do not cover their whole villages. If the address is outside the district boundary, the district commission is not involved, but the citywide partial demolition review still applies to houses over 50 years old.
How much is a siding permit in Newton?
The Inspectional Services Department charges $20 for every $1,000 of estimated cost, rounded up to the nearest thousand. A $44,200 job is treated as $45,000, so the permit is $900. The residential minimum is $50.
Can I keep the old siding and go over it?
Building code and product instructions decide whether a layer can stay. In Newton, going over the old siding is still enveloping the wall, so the partial demolition review applies either way on an older house.
Is wall insulation covered by Mass Save in Newton?
It may be. Newton is not served by a municipal light plant, so eligibility depends on your own utility accounts. The program lists 75 to 100 percent off approved insulation and air sealing, and an open wall is the easiest time to do it.
Sources
Facts on this page were last checked against these sources on November 17, 2026.
- City of Newton, Historic Preservation (review FAQs and demolition definitions) (accessed 2026-11-17)
- City of Newton, Local Historic District Commissions (accessed 2026-11-17)
- City of Newton, Compiled demolition delay and landmark memo (October 2019) (accessed 2026-11-17)
- City of Newton, Inspectional Services (accessed 2026-11-17)
- City of Newton, Building Information (building permits) (accessed 2026-11-17)
- City of Newton, Inspectional Services permit fee schedule (PDF) (accessed 2026-11-17)
- Mass.gov, HIC contractor resources (what work requires an HIC, CSL or building permit) (accessed 2026-11-17)
- Mass.gov, Learn about different Construction Supervisor Licenses (accessed 2026-11-17)
- US EPA, Renovation, Repair and Painting Program for contractors (accessed 2026-11-17)
- Mass Save, Insulation and Air Sealing (accessed 2026-11-17)
- Mass.gov DPU, Massachusetts municipally-owned electric companies (accessed 2026-11-17)
- Massachusetts DOER, Municipal Energy Code List (CSV, November 3, 2026) (accessed 2026-11-17)
- US Census Bureau, ACS 2020 to 2024 5-year, B25034 year structure built (accessed 2026-11-17)
- US Census Bureau, ACS 2020 to 2024 5-year, B25024 units in structure (accessed 2026-11-17)