General Contractor Milford MA: Permits, Multi-Family Homes and Floors

Choosing a general contractor Milford MA property owners can count on is mostly about who prepares a complete permit package. Milford's Department of Inspections at Town Hall, 52 Main Street, publishes a checklist that asks for insurance, an energy code form, two sets of plans and a site plan. Milford is also one of the towns still on the state's base energy code rather than the Stretch Code, and more than a fifth of its housing units are in two, three and four unit buildings.

The permit package a general contractor Milford MA jobs need

Milford’s Department of Inspections is responsible for building, plumbing, gas and electrical permits, and it also enforces the town’s zoning by-laws and the state Architectural Access Board regulations. The office is at Town Hall, 52 Main Street, Room 4, and the department’s page links its online permitting system on CitySquared. The Building Commissioner is also the Zoning Officer.

What sets Milford apart is how plainly the town lists what a building permit application needs. Its page tells applicants to check their zoning district regulations first, then supply:

  1. An application filled out completely by the owner or the contractor.
  2. Proof of liability and workers compensation insurance.
  3. A completed MAScheck energy code form.
  4. A description of the work.
  5. Two sets of plans and specifications.
  6. A site plan showing lot size, the size and location of all new construction, every existing structure on the site and the distances from lot lines.
  7. The contractor’s name, address, phone number and Construction Supervisor License number. The town notes that an owner may instead take on the work and its responsibility.
  8. A sewer permit from the Sewer Commissioners, or a septic system plan approved by the Town Engineer and Conservation Commission.

If an item is missing, the application is not complete. When we file in Milford, the site plan and the energy form are drawn up before the application goes in, not after the first rejection.

Why the base energy code matters here

The Department of Energy Resources list dated November 3, 2026 shows the town on the base energy code, with no Stretch or Specialized Code adoption. Many Massachusetts communities have moved to the Stretch Code, so this is worth knowing if your designer usually works elsewhere.

That does not mean energy rules are loose. A new house, an addition or a finished attic still has to meet the current state energy code, and the MAScheck form on Milford’s checklist is how the applicant shows compliance. Owners who want a tighter house than the base code asks for can still build one, and Mass Save offers may help depending on the customer’s utility. Milford is not on the state’s list of towns served by a municipal light plant. Our energy code guide lays out the tiers.

Housing age and the multi-family share

Census estimates for 2020 to 2024 give Milford a median year built of 1971. The breakdown:

  • 22.6 percent of housing units built before 1940
  • 12.2 percent from 1940 to 1959
  • 29.0 percent from 1960 to 1979
  • 23.3 percent from 1980 to 1999
  • 12.9 percent in 2000 or later

The building mix is where Milford differs from its suburban neighbors. Detached houses are 55.5 percent of units, but two-family buildings add 10.0 percent and three and four unit buildings 11.9 percent.

A two or three family house changes the job. The permit scope has to say which unit the work is in, the separation between units has to be kept intact through a renovation, and an owner who lives in one unit and rents the others is still covered by the state’s home improvement contractor rules for owner-occupied buildings of one to four units. Paint in any unit built before 1978 brings in the state’s lead-safe renovation requirements. We plan staging so tenants keep heat, water and a way out while work is underway.

Flooring and concrete coatings

Floors are often the first thing to wear out in a rental unit. Flooring Milford MA projects we take on include ceramic and porcelain tile in kitchens and baths, plank floors through a whole apartment, and subfloor repair under old linoleum. See our flooring and tile page.

We also apply concrete coatings Milford MA homeowners want on garage floors and basement slabs, and commercial concrete coatings on shop, storage and small retail floors. Most of the work is prep: grinding, checking moisture, and repairing cracks before any coating goes down. Moisture coming up through a slab can make a coating fail, which is why we look at drainage and basement waterproofing first. Structural slab and step work is covered on our masonry and concrete page.

Proposed flood maps

FEMA published proposed flood hazard determinations for Worcester County on January 21, 2026, and Milford is on the list, with Town Hall at 52 Main Street as the place to see the preliminary maps. Those maps are dated November 26, 2024 and August 13, 2025, and comments were due April 21, 2026. A property near a brook or low ground should be checked against both the current and the proposed panels before an addition is designed.

ADUs, additions and planning

Milford is a member of the Metropolitan Area Planning Council’s SouthWest Advisory Planning Committee subregion. The 2024 state law allowing one accessory dwelling unit by right in single family zoning applies here as everywhere outside Boston. An ADU or an addition follows the same checklist above, including the site plan with distances to lot lines. Our ADU builder page and home additions page explain the process, and if the work includes the roof, the Milford roofing page covers that permit in detail.

Before you sign

Any home improvement contract over $1,000 for an owner-occupied home of one to four units must be in writing. Contact us with the address, the number of units and the year built. The Massachusetts overview covers statewide rules.

Popular projects in Milford

Other services in Milford

Frequently asked questions

Where do I apply for a building permit in Milford?

Through the Department of Inspections, Building and Inspections, at 52 Main Street, Room 4, phone 508-634-2313. Its page links the town's online permitting system on CitySquared. The department also handles plumbing, gas and electrical permits and enforces zoning.

What goes into a Milford building permit application?

The town's list starts with checking your zoning district rules. Then a complete application from the owner or contractor, proof of liability and workers compensation insurance, a MAScheck energy code form, a written description of the work, two sets of plans and specifications, a site plan with lot size, structures and distances to lot lines, the contractor's name, address, phone and Construction Supervisor License number, and a sewer permit or an approved septic plan when it applies.

Is Milford on the Stretch Energy Code?

No. The Department of Energy Resources list dated November 3, 2026 shows Milford on the base energy code, without a Stretch or Specialized Code adoption. New homes and additions still have to meet the current state energy code, and the MAScheck form on the town checklist is part of showing that.

Do you install flooring or concrete coatings in Milford?

Yes. Flooring Milford MA owners ask about ranges from tile in a bathroom to plank floors through a whole unit, and we also coat garage and basement slabs. Commercial concrete coatings Milford MA businesses want for a shop or storage floor are priced after we see the slab, because moisture and old sealers decide what will bond.

Can I add an accessory dwelling unit in Milford?

The 2024 state law allows one ADU by right in single family zoning in every community except Boston, so it applies in Milford. Town zoning still governs setbacks and parking, and the building permit follows the same checklist as any addition.

Sources

Facts on this page were last checked against these sources on November 17, 2026.

  1. Town of Milford, Building and Inspections (Wayback Machine archive, January 8, 2026) (accessed 2026-11-17)
  2. Town of Milford, Building, obtaining a building permit (Wayback Machine archive, January 9, 2026) (accessed 2026-11-17)
  3. Massachusetts DOER, Municipal Energy Code List (CSV, November 3, 2026) (accessed 2026-11-17)
  4. Federal Register, Proposed Flood Hazard Determinations, Worcester County, Massachusetts (January 21, 2026) (accessed 2026-11-17)
  5. MAPC, Subregions (SouthWest Advisory Planning Committee) (accessed 2026-11-17)
  6. US Census Bureau, ACS 2020 to 2024 5-year, B25034 year structure built (accessed 2026-11-17)
  7. US Census Bureau, ACS 2020 to 2024 5-year, B25024 units in structure (accessed 2026-11-17)
  8. Mass.gov, Lead-safe renovation for homeowners (accessed 2026-11-17)
  9. Mass.gov EOHLC, Accessory dwelling unit FAQs (accessed 2026-11-17)

Planning a project in Milford?

Free, no-pressure estimates in Boston and across Massachusetts.