Roof replacement cost Massachusetts averages, 2025
The short answer: plan on the mid $30,000s for a full asphalt shingle replacement on an average-size house near Boston, and expect your own number to land above or below that depending on the roof.
That figure comes from the 2025 Cost vs. Value report published by Remodeling magazine and the Journal of Light Construction. It is the newest edition available when we checked in November 2026. The report lists Boston as its only Massachusetts city, so the Boston and New England columns are the closest published reference for homes anywhere in the state.
| Project, 2025 Cost vs. Value | Boston average job cost | New England average | National average | Boston resale value | Boston cost recouped |
|---|---|---|---|---|---|
| Roof replacement, asphalt shingles | $35,658 | $35,701 | $31,871 | $21,177 | 59.4% |
| Roof replacement, metal | $56,042 | $56,282 | $51,865 | $22,465 | 40.1% |
All of these are estimated averages for 2025, not our prices and not anyone’s quote. Boston’s asphalt figure sits about 12 percent above the national average in the same report, which matches what most people already suspect about building costs here.
What the model roof includes
Before you hold the $35,658 average up against a quote, look at what job it describes. The report’s asphalt project assumes the crew removes and disposes of the old roofing down to bare wood sheathing, then installs 30 squares of fiberglass asphalt shingles with at least a 25-year warranty. A square is 100 square feet of roof surface. The scope also includes felt or synthetic underlayment, galvanized drip edge, aluminum flashing, custom flashing at two average-size skylights, and a vented ridge cap. The roof is a plain rectangular hip roof.
If you divide the Boston average by 30 squares you get about $1,190 per square. That is our arithmetic on the report’s number, and it only holds for a roof that looks like the model. A Cape with two dormers, a Victorian with a turret and porch roofs, or a triple-decker with a parapet will price differently even at the same square footage.
The report also explains where the numbers come from. Its 2025 methodology describes a national baseline built from Bureau of Labor Statistics and Bureau of Economic Analysis price data and installer wage changes since 2019, local pricing from Verisk’s remodeling estimating data, and resale values from an online survey of more than 6,000 Realtors. In other words, the cost column is an estimating model and the resale column is agents’ opinion, not recorded sales.
What pushes a Massachusetts roof above or below the average
Layers, decking and surprises under the shingles
The model job strips one roof to the deck. Many older Massachusetts houses carry two layers, and some carry three. Every extra layer means more labor and more weight in the dumpster. Rotten sheathing is the other unknown. Nobody can count bad boards until the shingles are off, so a fair estimate prices replacement decking as a unit cost per sheet rather than burying a guess in the total.
Pitch, height and access
A walkable roof on a ranch in Burlington is a different job from a steep Victorian roof three stories up in Jamaica Plain. Steep pitch slows every step and needs roof jacks and harness anchors. On triple-deckers and rowhouses with no side yard, getting material up and debris down can take more planning than the roofing itself. The City of Boston also says that on buildings with three or more units, including one floor of a triple-decker, the owner has to hire a contractor for roof work. Do-it-yourself savings are only on the table for owner-occupied one and two unit homes.
Flat roofs
Many triple-deckers have flat or low-slope rubber roofs. The Cost vs. Value report does not model a flat roof, and we have not found a published Massachusetts average we would stand behind. Flat roof cost depends on drainage, tapered insulation, parapet flashing and whether a roof deck has to come off. We price those after measuring.
Disposal and the dumpster
Tear-off debris has to go somewhere. In Boston, a dumpster on the street or sidewalk needs a street occupancy permit from Public Works. The City lists a $50 base fee, plus 10 cents per square foot per day for the first 500 square feet occupied, 5 cents per square foot per day beyond that, and $20 per metered space per day. Applications are due at least seven business days before you need the space. As a rough example of that formula, a container taking up 160 square feet for seven days would run $50 plus $112 in space fees, before any meters.
Permits
Boston Inspectional Services handles roof replacement as Short Form permit work when nothing structural changes. The fee is $20 plus $10 for every $1,000 of estimated cost, all due up front. On a job near the Boston average, that is a little under $380. If rafters need more than sistering or the roof shape changes, the job moves to a Long Form permit, which the City prices at $50 plus $10 per $1,000 and which requires plans stamped by a Massachusetts registered engineer or architect.
Outside Boston, each town sets its own fee schedule, but the state’s guidance chart lists new or replacement roofing as work that needs a building permit, a Construction Supervisor License (roofing at minimum) and Home Improvement Contractor registration. Our Boston building permits guide goes through the filing steps.
Lead-safe work on older houses
Roofing itself is not painted, but the trim around it usually is: fascia, rake boards, cornices, dormer cheeks and soffits. Massachusetts requires that paid work on pre-1978 housing that disturbs more than 20 square feet of painted exterior surface be done by a licensed lead-safe renovation contractor, with a certified supervisor on site the whole time work is going on. Replacing rotted fascia or rebuilding a cornice during a re-roof can cross that line quickly. Containment sheeting on the ground and the extra cleanup add labor that the model job does not include.
Historic districts
Boston has 10 local historic districts, and the City’s Office of Historic Preservation reports that they processed more than 933 design review applications in 2025. A visible change to roofing material, or even a like-for-like replacement in some districts, can need commission approval before the permit. The review itself mostly costs time. Where a commission expects slate or copper to stay slate or copper, it also sets your material budget.
Material tier
The report’s two roofing projects give a clean comparison. In Boston, a metal roof averaged $56,042 against $35,658 for asphalt, roughly 57 percent more. The report does not cover slate, copper or rubber membranes, so we do not quote averages for them. Those are priced per job after we see the roof.
The attic and the edges
Ice dam fixes, attic air sealing and insulation are often worth doing while the roof is open, but they are separate line items. So are new gutters and fascia. Our insulation and air sealing work and gutters and trim pages explain those jobs.
Does a more expensive roof pay off at resale?
Agents surveyed for the 2025 report estimated that a Boston asphalt roof adds $21,177 to a home’s sale price, or 59.4 percent of its $35,658 cost. A metal roof added an estimated $22,465, or 40.1 percent of $56,042. Spending about $20,400 more for metal bought roughly $1,300 more in estimated resale value.
So the case for a premium roof in Massachusetts rests on how long you plan to stay and how long the roof lasts, not on what a buyer pays for it. If you expect to be in the house for decades, our guide to how long a roof lasts in Massachusetts is the better place to weigh it.
How to read and compare roofing estimates
Three quotes on the same roof can differ by thousands of dollars, and the cheapest one is often missing something. Line them up on these points:
- Does each quote strip to the deck, and does it say how many layers are coming off?
- Is replacement sheathing priced per sheet, with the number of sheets included in the base price stated?
- Which underlayment goes on, and is ice barrier membrane included at the eaves and valleys?
- Is flashing at walls, chimneys and skylights new, or is old flashing being reused?
- Are ventilation, drip edge and ridge cap included?
- Are the permit, dumpster, street occupancy fee and cleanup in the price, or billed later?
- Does the contract separate the manufacturer’s shingle warranty from the contractor’s workmanship warranty, and say how long each lasts?
- Are the Construction Supervisor License and Home Improvement Contractor registration numbers on the contract?
That last one matters for money as well as legality. Massachusetts requires building permits, contracts and advertising to carry the contractor’s active registration number, and permits must state that homeowners who use unregistered contractors have no access to the state’s Guaranty Fund.
Payment schedules under Massachusetts law
For work over $1,000, Massachusetts requires a written contract between the contractor and the homeowner. The Home Improvement Contractor law spells out how payment works. The contract must list a time schedule of payments with each amount stated in dollars, including any finance charges. The deposit taken before work begins cannot exceed the greater of one third of the total contract price or the actual cost of special-order or custom materials that have to be ordered in advance. And no final payment can be demanded until the work is complete to the satisfaction of both parties.
On a roof, the practical reading is simple. Asphalt shingles and underlayment are stock items at most suppliers, so a request for well over a third up front deserves a direct question. Custom copper, specialty slate or a made-to-order metal panel order is where a larger deposit can be legitimate.
Getting a real number for your roof
Averages help you budget. They will not tell you what your roof costs, because no published report has been in your attic. We give fixed written estimates after a site visit, with decking, flashing, disposal and permit costs broken out as separate lines.
Our roofing services page explains how we approach tear-offs, flat roofs, slate and copper. For homes outside Boston, see roofing across Massachusetts. If windows are on the list too, our window replacement cost guide uses the same report. When you want a number for your house, contact us to set up a visit.
This guide is general information for homeowners, not legal advice. Rules change and vary by city or town. Confirm details with your local building department or the state agency listed in the sources.
Common questions
How much does a new roof cost in Massachusetts?
The 2025 Cost vs. Value report estimates $35,658 on average to replace a 30-square asphalt shingle roof in Boston and $35,701 across New England. Those are averages for a defined model job. Your roof's size, pitch, layers, decking and access will move the real number, which is why we only give a fixed price in writing after a site visit.
What is the average cost of a new roof in Massachusetts per square?
The report does not publish a per-square figure. Dividing its Boston average of $35,658 by the 30 squares in the model job gives roughly $1,190 per square of roof. Treat that as arithmetic on an average, since small, steep or cut-up roofs cost more per square than a simple hip roof.
How much does it cost to replace a roof in Boston, counting the permit?
Boston charges $20 plus $10 per $1,000 of estimated cost for a Short Form permit. On a job near the $35,658 average, that works out to a little under $380. If the dumpster sits on the street, Public Works adds a street occupancy permit with a $50 base fee and daily space charges.
Is a metal roof worth the extra cost in Boston?
Not on resale alone. In the 2025 report, a Boston metal roof averaged $56,042 and agents put its resale value at $22,465, while an asphalt roof averaged $35,658 with a resale value of $21,177. People choose metal for how long it lasts and how it sheds snow, not for what it adds to the sale price.
Can a roofer ask for half the price before starting?
Only if special-order materials cost that much. Under the Massachusetts Home Improvement Contractor law, the deposit cannot exceed the greater of one third of the contract price or the actual cost of custom or special-order materials that must be ordered before work begins. Standard shingles rarely fall in that category, so ask.
Why is my roofing quote higher than the published average?
Usually because your roof is not the model roof. Extra layers to strip, rotten sheathing, dormers and chimneys to flash, a steep third-story roof on a tight lot, lead-safe work on painted trim, or historic district review all add cost that a simple 30-square hip roof does not have.
Sources
Facts on this page were last checked against these sources on November 16, 2026.
- Remodeling, 2025 Cost vs. Value report, Boston, Massachusetts (city, New England and national averages) (accessed 2026-11-16)
- Remodeling, Cost vs. Value project description, Roofing replacement, asphalt shingles (accessed 2026-11-16)
- Remodeling, 2025 Cost vs. Value methodology (accessed 2026-11-16)
- City of Boston, How to get a Short Form permit (fees) (accessed 2026-11-16)
- City of Boston, Repair a roof (who may do the work) (accessed 2026-11-16)
- City of Boston Public Works, How to get a street occupancy permit (fees) (accessed 2026-11-16)
- Mass.gov, HIC contractor resources (deposit limit, payment schedule, permit chart) (accessed 2026-11-16)
- Mass.gov, Lead-safe renovation for homeowners (6 and 20 square foot thresholds) (accessed 2026-11-16)
- Mass.gov, Lead-safe renovation for contractors (accessed 2026-11-16)
- City of Boston, Office of Historic Preservation 2025 year in review (accessed 2026-11-16)